Forsvarets skyte- og øvingsfelt i sjø

Status: Submitted

Definition: Datasettet Skyte- og øvingsfelt (SØF) i sjø viser skyte- og øvingsområder som Forsvaret bruker til sjøs. Forsvarets skyte- og øvingsfelt er tilrettelagte områder hvor Forsvaret kan skyte, øve og trene operasjoner i alle dimensjoner; luftrom, overflate og under vann. Datasettet viser eksisterende og nye skyte- og øvingsfelt (SØF) i høringsforslag av 13.sept. 2021 til ny forskrift om skyte- og øvingsfelt i sjø. Datasettet Forsvarets skyte- og øvingsfelt i sjø – anbefalt avviklet viser skytefelt som i høringsforslag av 13.sept. 2021 har status anbefalt avviklet. Datasettet inneholder den geografiske avgrensningen av feltene på overflaten. Datasettet beskriver ikke fare-/restriksjonsområder for luftfarten, som kan avvike fra skytefeltets geografiske representasjon på overflaten.

Updated: 20.05.2026
Submitter: Norwegian Mapping Authority
Owner: The Norwegian Defence Estates Agency

Usage

Dataene egner seg til arealplanlegging og arealbruks-forvaltning for øvrig. For skyte- og øvingsfelt som ligger innenfor plan- og bygningslovens virkeområde (innenfor én nautisk mil utenfor grunnlinjen) anbefaler Forsvarsbygg at det etableres hensynssoner etter plan- og bygningslovens § 11-8 a med bestemmelser som forhindrer etablering av faste anlegg og installasjoner. For skyte- og øvingsfelt som ligger utenfor plan- og bygningslovens virkeområde vil områdene bli sikret med vedtak av en forskrift med hjemmel i Sikkerhetsloven. Forsvarsbygg har utarbeidet en planveileder for Forsvarets arealbruksinteresser, herunder i sjø. Den kan lastes ned her: https://www.forsvarsbygg.no/no/publikasjoner/arealplanlegging/

Explanation of assessment of FAIR principles:

There have made various tests to evaluate datasets in relation to the FAIR criteria. These are our interpretations, which then assess the criteria in relation to standards and protocols used for spatial data in Norway and Europe. For more information on which calculations we use for each indicator, look at the details of FAIR assessments for each specific dataset.

Read more Read less

Good (over 90%): The dataset adheres to the FAIR principles in a good way. You must do qualitative research yourself to assess any measures to further improve conditions regarding re-use.

Satisfactory (75-90%): The dataset meets many of the FAIR principles, but should be improved in several areas to ensure reuse.

Needs improvement (50-75%): The dataset meets a few of the FAIR principles in a good way, and needs to be improved in several areas.

Poor (less than 50%): The dataset has major shortcomings in terms of meeting FAIR principles and needs to be improved in many areas

FAIR-status: 90%

100%

Findable: Metadata and data should be easy to find for both humans and computers. Machine-readable metadata are essential for automatic discovery of datasets and services

Details Read less

  • F1: (Meta)data are assigned a globally unique and persistent identifier
    • It is checked that there is metadata in Geonorge. (All metadata in Geonorge have persistent and unique identifiers and are searchable on the web). The request returns metadata in a standardized form. (weight 20)
  • F2: Data are described with rich metadata
    • At least three thematic keywords must be entered in the metadata (weight 10)
    • Title should be a maximum of 105 characters to provide a simple and consistent name that is easy searchable (weight 5)
    • The description should be at least 200 characters to be able to provide sufficient information about the dataset to obtain a good but concise and precise description of what the dataset contains. (There are specific metadata elements where you can enter supplementary information, lineage, quality, update frequency, possibly link to other documentation such as Data Product Specifications, Product sheets, etc). (weight 10)
    • Geo-search. Geographical extent must be specified.
    • Time-based search. Date of creation must be stated in metadata.
  • F3: Metadata clearly and explicitly include the identifier of the data they describe
    • Metadata should have a unique reference to the dataset. Datasets should not only be referred to by name, but also by the unique identifier (uuid) for the dataset. This must be entered in the metadata together with a namespace. (Datasets are defined with unique IDs in Geonorge's namespace register if they have entered dataset-IDs in metadata) (weight 20)
  • F4: (Meta)data are registered or indexed in a searchable resource
    • Metadata located in Geonorge is searchable through CSW API (OGC) and DCAT API (W3C). This makes metadata searchable through standardized APIs for the geodata industry, research and science and "open data" industry both nationally and internationally. (weight 20)
60%

Accessible: Datasets must be accessible through standardized and open interfaces.

Details Read less

  • A1: Datasets are available through standard web protocols and open standardised services
    • It is checked whether the dataset has a "direct" download service (WFS, WCS, OpenDAP, OGC API Features or OGC API Coverages) (weight 20)
    • It is checked whether the dataset has a display service (WMS, WMTS, OGC API Maps, OGC API Styles or OGC API Tiles) (weight 20)
    • It is checked whether the dataset is available through the "Geonorge download api" (weight 5)
    • Checking if dataset is available as a download service for predefined datasets (Atom Feed) (weight 5)
    • It is checked whether the protocols that provide access to the datasets are openly accessible and readable with standard IT tools. Which we consider to be sufficient if one has provided a download URL with Https response or by offering one of the two APIs mentioned above (weight 50)
    • The protocol allows for an authentication and authorisation procedure, where necessary
  • A2: Metadata are accessible, even when the data are no longer available
100%

Interoperabel: The data usually need to be integrated with other data. In addition, the data need to interoperate with applications or workflows for analysis, storage, and processing.

Details Read less

  • I1: Metadata and datasets are represented through international, well-documented and accessible standards.
    • Metadata for geodata must be established in accordance with the metadata standard ISO19115. (Metadata in Geonorge is based on the mentioned standard.) (weight 20)
    • The dataset is available in internationally recognized open formats. It is checked for GML, GeoJSON, JSON-FG, JSON-LD and GeoPackage for vector data or TIFF, JPEG, Cloud Optimized GeoTIFF (COG) or Cloud Optimized Point Cloud (COPC) for raster data in addition to NetCDF (weight 40)
  • I2: Metadata and datasets shall use vocabularies, concepts and code lists and refer to searchable resources on the web that are managed with unique identifiers.
    • At least one thematic keyword must be entered from an official national or international vocabulary (e.g. GEMET (Inspire theme), NASA/GCMD (Global vocabulary with descriptions of scientific datasets and services) or LOS (National categorization of public services and resources)) (weight 10)
    • At least one National theme category must be filled in metadata to categorize the dataset in a national context (weight 10)
  • I3: (Meta)data include qualified references to other (meta)data
    • The data set must be in accordance with the stated product specification (weight 10)
    • The dataset must be modeled in UML and the metadata must refer to the UML model in Geonorge's object catalog (SOSI model register) (weight 5)
    • The dataset must be in accordance with the UML model in at least one of the delivered formats (weight 5)
100%

Reusable: The ultimate goal of FAIR is to optimise the reuse of data. To achieve this, metadata and data should be well-described so that they can be replicated and/or combined in different settings.

Details Read less

  • R1.1: (Meta)data are released with a clear and accessible and resolvable data usage license
    • Licenses in the Geonorge register meet this requirement (weight 30)
    • Access rights must be specified (weight 5)
  • R1.2: Metadata about quality, coverage, processing, calculations, etc. must be provided.
    • Lineage must be provided with more than 200 characters (weight 10)
    • Update frequency must be specified in metadata (weight 5)
    • Link to Data Product Specification must exist in metadata(weight 10)
    • Scale for the dataset must be provided in the metadata(weight 5)v
    • Coverage map must be provided in the metadata (by municipality, grid or image/pdf) (weight 5)
    • Purpose must be provided in the metadata (weight 5)
    • Metadata contact must be provided (weight 5)
    • Technical contact must be provided (weight 5)
    • Coverage rate (proportion of mapped area in relation to the extent of the dataset) must be stated or completeness coverage map should be provided in metadata. (weight 5)
  • R1.3 (Meta)data meet domain-relevant community standards
    • Metadata must follow the standards: ISO19115 and DCAT-AP-NO (weight 5)
    • Data sets are delivered in international open formats. See Interoperability Requirement 1b (weight 5)
Back